W80DM and CUCM sip registration issue - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: General topics (/forumdisplay.php?fid=15) +--- Thread: W80DM and CUCM sip registration issue (/showthread.php?tid=46996) |
W80DM and CUCM sip registration issue - kozlov - 10-11-2023 03:29 PM Hello yealink community! I have W80DM (fw 103.85.0.25) + 1 base W80D. 2 handsets - W78H and W56H. Handsets successfully registered at base station, but i have problems with sip account registration. I am using Cisco Callmanager 11.5 as sip server, all configuration were completed on it. The main problem is that i am unable to register more than one handset at the same time. Get "Register Failed". CUCM just response as 401 Unauthorized. When i disable account at first dect phone, second registered successfully. So it is not an configuration issue. I suppose that this problem exist because Yealink use the same local TCP|UDP port for registration. Are there any ways to resolve this issue? RE: W80DM and CUCM sip registration issue - Alisha Kihn - 11-15-2023 10:58 AM One possible reason for this issue could be that the Yealink W80DM is using the same local TCP/UDP port for registration, causing conflicts when multiple handsets try to register simultaneously. Candy Crush |