Change fimware from Enreach / Swyx to 3CX - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: T4x Series (/forumdisplay.php?fid=31) +--- Thread: Change fimware from Enreach / Swyx to 3CX (/showthread.php?tid=46923) |
Change fimware from Enreach / Swyx to 3CX - f.ender - 09-20-2023 10:56 PM Hello, I have some t48s Phones and want to change the Firmware to 3CX Firmware. But I only get the message: Code: Firmware update failed! I have read that there is some "brake-off" Firmware to change the brand, but I don't find any or who I have to contact to get the Firmware. Can someone help me? Thanks! RE: Change fimware from Enreach / Swyx to 3CX - Yisroel_MongoTEL - 09-26-2023 09:48 PM (09-20-2023 10:56 PM)f.ender Wrote: Hello, See some information from them about it here https://service.swyx.net/hc/en-gb/articles/360017746859-Yealink-T4xS-CP-Phones-Additional-Notes-on-installing-firmware (Which phone model and which firmware version does it currently have?) RE: Change fimware from Enreach / Swyx to 3CX - f.ender - 09-27-2023 03:34 AM Hi, thanks for your reply. I have a Yealink T48s with the Firmware 66.85.133.10. But your link helps me! I had to downgrade the Firmware to 66.84.133.12 and then create a license at the Yealink License Center. Then it was possible to Upgrade to the Firmware version 66.86.0.15. RE: Change fimware from Enreach / Swyx to 3CX - Yisroel_MongoTEL - 09-27-2023 03:48 AM (09-27-2023 03:34 AM)f.ender Wrote: Hi, Great! |