SIP-T46U no boot only RED MWI LED - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: T4x Series (/forumdisplay.php?fid=31) +--- Thread: SIP-T46U no boot only RED MWI LED (/showthread.php?tid=46828) |
SIP-T46U no boot only RED MWI LED - sysintegrate - 08-17-2023 05:07 PM Hello, i've got 12 brand new SIP-T46U from my Distributor, i preconfgured them to the new Auerswald Commtrexx Business PBX. After a reboot of the hole System (Cisco CBS250-48PP, PBX, all Phones) one Phone will not boot. Only a RED LED Light on the MWI lights up, no display backlight, no sound - nothing. All Phones are powered over PoE+, all the other phones doesnt show this error. I think something in Boot process failed? Could i fix this? Or should i send this phone back? I checked to press the + - Button to bring up a sound or longer press X to reboot the phone, without success. Thanks, Martin RE: SIP-T46U no boot only RED MWI LED - Yisroel_MongoTEL - 08-18-2023 09:50 PM This is something that happens from time to time with Yealink phones and it means that phones or gone. Just send it back and get a replacement. |