+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: W80DM/B bad vioce quality (/showthread.php?tid=46740)
W80DM/B bad vioce quality - thomas.theis@cel.lu - 06-29-2023 08:25 PM
Hi,
We have problems with very strong scratchy noise during a conversation when walking past the transmitters when there is a handover. The transmitters are installed at a distance of about 30-40m. The voice quality is overall very poor when talking to DECT devices, there is also a very large delay in the voice from DECT to DECT calls 1-2 sec.
This noise is actually mainly found at the base stations in production. It's a mechanical engineering company.
Is there anything known about this that can trigger such disturbances through something like this?
I have already installed many DECT systems (Ascom) and have never had such a problem before.
On top, they report that sometimes the Phones (w76p) restart themselves.
Or the Phones shows ok but you cant make/receive Call and you must reboot the Phone.
We use the last Firmware for 3cx on the BS.