EXP50 Set up - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Yealink Device Management Platform (/forumdisplay.php?fid=61) +--- Thread: EXP50 Set up (/showthread.php?tid=46651) |
EXP50 Set up - Sollylogger - 05-18-2023 04:32 AM Bought a EXP50 to pair with a T54w from Verizon. We cannot access the web page to do the set up. Nor does there seem to be a way to set it up manually. We would like to use it mostly to quickly transfer calls to another person in the office. Any ideas for us? RE: EXP50 Set up - lomotex - 08-09-2023 02:51 PM The EXP50 has no own web interface, just connect it with the USB cable to the USB port of the T54W. Then in the web interface of the T54W go to "Dsskey->Ext key". If it works you will see a list of all the keys, otherwise you'll see the message "No expansion module connected! Please connect one or more units then refresh this page." RE: EXP50 Set up - Yisroel_MongoTEL - 08-15-2023 11:15 PM (05-18-2023 04:32 AM)Sollylogger Wrote: Bought a EXP50 to pair with a T54w from Verizon. We cannot access the web page to do the set up. Nor does there seem to be a way to set it up manually. We would like to use it mostly to quickly transfer calls to another person in the office. Any ideas for us? After connecting it to the phone (it's powered up) you should be able to edit the EXP50 keys by long pressing them (for 3 secs). (08-09-2023 02:51 PM)lomotex Wrote: The EXP50 has no own web interface, just connect it with the USB cable to the USB port of the T54W. He's probably referring to the fact that he doesn't have web interface access to the T54W's Web GUI. |