Yealink Forums
not able to reigster to the base - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: Dect Phone Series (/forumdisplay.php?fid=6)
+--- Forum: W52P (Wireless) (/forumdisplay.php?fid=23)
+--- Thread: not able to reigster to the base (/showthread.php?tid=46477)



not able to reigster to the base - Janpreet - 02-24-2023 12:16 AM

Hello everyone, I have spent multiple hours trying to resolve this but no luck so far. I would greatly appreciate if you guys can help.

I have W52P base unit and Two W56P cordless phones and one W56H cordless phone. I did a firmware update on base unit W52P and after the upgrade my base unit got stuck in rebooting loop.

I had to factory reset the base unit which fixed the rebooting issue but now my cordless phones says 'searching for base' on them. I tried following things without any luck :

1. Tried to de-register the base from the handset but it says 'out of range'
2. Tried to register handset with Base 1 and all other bases (2,3,4) but it fails
3. Tried to reset the phone but Base 1 ID stay there.
4. I have downgraded the firmware on the base but still phones are not able to register.

I can access Base’s web user interface, and everything looks normal there. Not sure if this is the base issue or handset but I have exhausted all my resources.

Thanks and Regards