+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: Calling 3 digit numbers fails (emergency number) (/showthread.php?tid=46418)
Calling 3 digit numbers fails (emergency number) - mrotteveel - 01-29-2023 04:17 PM
Hi,
I have an T48U. doing a fresh setup.
incoming and normal outgoing traffic works ok, but when i try and dial a 3 digit (or 2 digit) number it fails with "adres incomplete" gives 3 "busy" sounds an stops.
There is no data send (or recieved) on the asterisk server, so the device isn't even trying the number.
What am i doing wrong ?
RE: Calling 3 digit numbers fails (emergency number) - complex1 - 01-29-2023 05:48 PM
(01-29-2023 04:17 PM)mrotteveel Wrote: Hi,
I have an T48U. doing a fresh setup.
incoming and normal outgoing traffic works ok, but when i try and dial a 3 digit (or 2 digit) number it fails with "adres incomplete" gives 3 "busy" sounds an stops.
There is no data send (or recieved) on the asterisk server, so the device isn't even trying the number.
What am i doing wrong ?
Hi,
I assume your Asterisk server doesn't accept numbers less than 4 digits.
Try dialing a 3 digit number and press # (e.g. 123#) and see if the call is established.