+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: Provisioning lines in positions on 2nd page of display (/showthread.php?tid=46141)
Provisioning lines in positions on 2nd page of display - bruceg - 10-01-2022 04:24 PM
We currently have Yealink T54s configured with a single line (position 1 on the display)and 8 BLFs associated with inbound sales campaigns (positions 2 through 9 on the display). We need to configure an additional 9 lines for outbound calls and have them displayed on "page 2" of the T54's display. If I configure it that way in the provisioning system in my switch (Fusionpbx) using lines 11 through 19, it drops lines 17, 18, and 19 (doesn't provision/display them) because the T54 only wants to use positions 1 through 16 for actual extensions.
The purpose is to allow the sales people to make an outbound call to a client using a specific extension that has a phone number in the call recipient's area code, but with these extensions displayed on the 2nd page of the Yealink display. Is there a way to get extensions configured in positions 17, 18, and 19 (or any other position for that matter)?