‘New’ W56/W60B default admin password not recognised? - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: Dect Phone Series (/forumdisplay.php?fid=6) +--- Forum: W60B(Wireless) (/forumdisplay.php?fid=59) +--- Thread: ‘New’ W56/W60B default admin password not recognised? (/showthread.php?tid=45979) |
‘New’ W56/W60B default admin password not recognised? - Russ1 - 08-06-2022 03:43 AM Hi folks, I’ve just had FTTP installed and switching my home lines over to VOIP. In preparation I’ve bought a W56/W60B handset/base combination. I’ve just plugged it in and after downloading the latest firmware I found I could make/receive calls straight away (from a UK geographic number)! Also the web interface doesn’t recognise the default admin user/password. Does this mean I have been supplied a device that has been pre-configured for somebody else? Thanks Russ RE: ‘New’ W56/W60B default admin password not recognised? - complex1 - 08-07-2022 01:14 AM (08-06-2022 03:43 AM)Russ1 Wrote: Hi folks, Hi, Normally it is not possible to make calls with a new device immediately. The device must be programmed first. You probably bought a 'new' device that is still registered to a previous user. You will have to contact the seller and ask them to fix it. RE: ‘New’ W56/W60B default admin password not recognised? - Russ1 - 08-07-2022 02:44 PM Hi Frank, Many thanks for your reply. I’m wondering if this phone perhaps was part of a pre-configured bundle for a corporate customer that has then “recycled” its unused equipment? I’ve been in contact with the seller and they will send me out another device tomorrow so we’ll see if that works. Thanks Russ. |