+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: T43-U incoming calls do not land on the correct line/button (/showthread.php?tid=45777)
T43-U incoming calls do not land on the correct line/button - rtfm2022 - 05-04-2022 09:22 PM
Dear All,
i've been trying to test and use Yealink phones for our organization and i am facing the following problem:
I have set up a Yealink T-43U phone with 8 lines.
Whenever i have incoming calls on lines 1, 2, 3, 4, 7, 8 then the correct and corresponding line/button flashes.
However, whenever i have incoming calls on lines 5 or 6 then the call lands on Line 1. If i disable Line 1, then the calls land on Line 2, etc. Only when i disable line 1-2-3-4 the correct Line/button flashes.
I have tried to change the sequence, but the same happens! I guess it has to do deal with the specific numbers, as they are from the same ITSP, but what could be thee cause? If there is something wrong with those 2 numbers, why do they accept calls normally when i disable all other lines?
Can anybody help us?
RE: T43-U incoming calls do not land on the correct line/button - rtfm2022 - 05-07-2022 03:14 PM
hello, any little help please?
RE: T43-U incoming calls do not land on the correct line/button - complex1 - 05-08-2022 01:23 AM
(05-07-2022 03:14 PM)rtfm2022 Wrote: hello, any little help please?
Hi,
Please reset the phone to factory settings and try again.
Is the phone auto-provisioned or installed manually?
Is the phone running on the latest firmware version?
RE: T43-U incoming calls do not land on the correct line/button - rtfm2022 - 05-08-2022 03:57 AM
(05-08-2022 01:23 AM)complex1 Wrote:(05-07-2022 03:14 PM)rtfm2022 Wrote: hello, any little help please?
Hi,
Please reset the phone to factory settings and try again.
Is the phone auto-provisioned or installed manually?
Is the phone running on the latest firmware version?
Hello and thank you for your reply!
1. the phone is manually installed by me.
2. the phone is running latest firmware-always and i had the same problem with previous firmware too
3. resetting to factory defaults already three times in one year but it didn't help!
RE: T43-U incoming calls do not land on the correct line/button - complex1 - 05-08-2022 05:29 PM
(05-08-2022 03:57 AM)rtfm2022 Wrote:(05-08-2022 01:23 AM)complex1 Wrote:(05-07-2022 03:14 PM)rtfm2022 Wrote: hello, any little help please?
Hi,
Please reset the phone to factory settings and try again.
Is the phone auto-provisioned or installed manually?
Is the phone running on the latest firmware version?
Hello and thank you for your reply!
1. the phone is manually installed by me.
2. the phone is running latest firmware-always and i had the same problem with previous firmware too
3. resetting to factory defaults already three times in one year but it didn't help!
Hi,
You are also saying: "I have tried to change the sequence, but the same happens!".
Have you switched the numbers belonging to lines 5 and 6 with e.g. line 2 and 3 to see what happens?
Is the phone connected to some kind of PBX?
RE: T43-U incoming calls do not land on the correct line/button - rtfm2022 - 05-09-2022 09:16 PM
(05-08-2022 05:29 PM)complex1 Wrote:(05-08-2022 03:57 AM)rtfm2022 Wrote:(05-08-2022 01:23 AM)complex1 Wrote:(05-07-2022 03:14 PM)rtfm2022 Wrote: hello, any little help please?
Hi,
Please reset the phone to factory settings and try again.
Is the phone auto-provisioned or installed manually?
Is the phone running on the latest firmware version?
Hello and thank you for your reply!
1. the phone is manually installed by me.
2. the phone is running latest firmware-always and i had the same problem with previous firmware too
3. resetting to factory defaults already three times in one year but it didn't help!
Hi,
You are also saying: "I have tried to change the sequence, but the same happens!".
Have you switched the numbers belonging to lines 5 and 6 with e.g. line 2 and 3 to see what happens?
Is the phone connected to some kind of PBX?
i performed reset to factory defaults (again).
i added only lines 5 and 6 with a new sequence of 1 and 2. result: the same! when i call line 1 it's ok, when i call line 2 again it's line 1 that the call lands on...
RE: T43-U incoming calls do not land on the correct line/button - complex1 - 05-10-2022 01:34 AM
(05-09-2022 09:16 PM)rtfm2022 Wrote:(05-08-2022 05:29 PM)complex1 Wrote: Hi,
You are also saying: "I have tried to change the sequence, but the same happens!".
Have you switched the numbers belonging to lines 5 and 6 with e.g. line 2 and 3 to see what happens?
Is the phone connected to some kind of PBX?
i performed reset to factory defaults (again).
i added only lines 5 and 6 with a new sequence of 1 and 2. result: the same! when i call line 1 it's ok, when i call line 2 again it's line 1 that the call lands on...
Hi,
If all phone lines come from the same ITSP then I think you have to contact them.
Maybe a configuration issue at their site, because you have changed lines 5 and 6 to lines 1 and 2 and the same issue occurs.
RE: T43-U incoming calls do not land on the correct line/button - rtfm2022 - 05-12-2022 05:41 PM
(05-10-2022 01:34 AM)complex1 Wrote:(05-09-2022 09:16 PM)rtfm2022 Wrote:(05-08-2022 05:29 PM)complex1 Wrote: Hi,
You are also saying: "I have tried to change the sequence, but the same happens!".
Have you switched the numbers belonging to lines 5 and 6 with e.g. line 2 and 3 to see what happens?
Is the phone connected to some kind of PBX?
i performed reset to factory defaults (again).
i added only lines 5 and 6 with a new sequence of 1 and 2. result: the same! when i call line 1 it's ok, when i call line 2 again it's line 1 that the call lands on...
Hi,
If all phone lines come from the same ITSP then I think you have to contact them.
Maybe a configuration issue at their site, because you have changed lines 5 and 6 to lines 1 and 2 and the same issue occurs.
Hello,
the problem is that i do not know what to ask them...