Yealink Forums
T54W & DD10K USB DECT DONGLE - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T5X Series (/forumdisplay.php?fid=58)
+--- Thread: T54W & DD10K USB DECT DONGLE (/showthread.php?tid=45656)

T54W & DD10K USB DECT DONGLE - landstartelco - 02-18-2022 04:52 AM

When using the T54W along with the DECT Dongle, can the T54W be registered to a W70B base station?

Some documentation indicates it can be while other documentation is vague.

Thomas

RE: T54W & DD10K USB DECT DONGLE - markvdheijden - 02-18-2022 05:26 PM

(02-18-2022 04:52 AM)landstartelco Wrote:  When using the T54W along with the DECT Dongle, can the T54W be registered to a W70B base station?

Some documentation indicates it can be while other documentation is vague.

Thomas

Yes this is possible, you need to install the firmware T54W-96.85.0.65.rom and then you can register it to a DECT station W60/70. If you use the other firmware it will act as base station.

Gr. Mark

RE: T54W & DD10K USB DECT DONGLE - pietro3d - 05-23-2023 04:23 PM

(02-18-2022 05:26 PM)markvdheijden Wrote:  
(02-18-2022 04:52 AM)landstartelco Wrote:  When using the T54W along with the DECT Dongle, can the T54W be registered to a W70B base station?

Some documentation indicates it can be while other documentation is vague.

Thomas

Yes this is possible, you need to install the firmware T54W-96.85.0.65.rom and then you can register it to a DECT station W60/70. If you use the other firmware it will act as base station.

Gr. Mark

what is the procedure to register the w54w to the dect w70b?
In status/headset I can only register an headset in w54, but not the w54 to w70

RE: T54W & DD10K USB DECT DONGLE - Yisroel_MongoTEL - 05-25-2023 11:11 PM

(05-23-2023 04:23 PM)pietro3d Wrote:  what is the procedure to register the w54w to the dect w70b?
In status/headset I can only register an headset in w54, but not the w54 to w70

Which firmware is the T54W on?

Take the latest one (96.85.0.95) from the T54W with DD10K page https://support.yealink.com/en/portal/docList?archiveType=software&productCode=97d6510144112ece

RE: T54W & DD10K USB DECT DONGLE - gio@ahoytel.com - 06-08-2023 05:16 AM

(05-25-2023 11:11 PM)Yisroel_MongoTEL Wrote:  
(05-23-2023 04:23 PM)pietro3d Wrote:  what is the procedure to register the w54w to the dect w70b?
In status/headset I can only register an headset in w54, but not the w54 to w70

Which firmware is the T54W on?

Take the latest one (96.85.0.95) from the T54W with DD10K page https://support.yealink.com/en/portal/docList?archiveType=software&productCode=97d6510144112ece

Any updates? Even with the latest firmware (96.85.0.95) there doesn't seem to be any option to connect the T54W to a W70b base station. The documentation seems to indicate this should be possible.

RE: T54W & DD10K USB DECT DONGLE - Yisroel_MongoTEL - 06-09-2023 05:04 AM

(06-08-2023 05:16 AM)gio@ahoytel.com Wrote:  Any updates? Even with the latest firmware (96.85.0.95) there doesn't seem to be any option to connect the T54W to a W70b base station. The documentation seems to indicate this should be possible.

In the Menu (make sure to have the 96.85.0.95 firmware, in the newer 96.86.0.70 I don't see this option) go to Status > Phone Mode and switch it to DECT-DDPhone, then after a reboot (which it prompts you to do) it should be in DECT mode and ask to register to base.

This setting can also be found in the web GUI:
[Image: CaN7ZhN.png]

And also with provisioning paramerer:
Code:
features.phone.mode=1