+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+---- Forum: T2xP Series (/forumdisplay.php?fid=21)
+---- Thread: T23G Connecting PC causes "Network Unavailable" (/showthread.php?tid=45650)
T23G Connecting PC causes "Network Unavailable" - MonkeySeeMonkeyDo - 02-15-2022 12:59 AM
I have a 20+ T23G phones.
If I daisy chain/connect a PC to the T23G (PC port) it will randomly cause the T23G to display "network unavailable."
I have replicated this issue with a large number of T23G phones, different users and 2 different types of PC/Devices connected to the T23G PC port.
My solution was NOT to daisy chain anything off of the T23G and then the phone works perfectly.
Hardware Version 44.0.0.16.0.0.0
Firmware Version 44.84.0.140
I have to run 44.84.0.140 because I am using them with 3CX
Is there anyone else out there that is experiencing a similar issue?