+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Auto Provisioning (/forumdisplay.php?fid=14)
+--- Thread: RPS MAC Removal (/showthread.php?tid=45638)
RPS MAC Removal - Kopernikus - 02-04-2022 06:50 AM
Hello, I hope someone can help me here! I have received a phone from my provider, which I would like to configure myself. However, my SIP configuration is constantly overwritten again by the auto provision function. For this reason I would like to delete it. I went to this page "https://ticket.yealink.com" clicked on RPS Mac Removal, entered my Serial and Mac address and then clicked "submit". Now a window pops up asking for my RPS account and password. I don't have an RPS account because I configure my phone manually. What can I do?
RE: RPS MAC Removal - salim3771 - 02-10-2023 02:29 PM
(02-04-2022 06:50 AM)Kopernikus Wrote: Hello, I hope someone can help me here! I have received a phone from my provider, which I would like to configure myself. However, my SIP configuration is constantly overwritten again by the auto provision function. For this reason I would like to delete it. I went to this page "https://ticket.yealink.com" clicked on RPS Mac Removal, entered my Serial and Mac address and then clicked "submit". Now a window pops up asking for my RPS account and password. I don't have an RPS account because I configure my phone manually. What can I do?
Yes it is very simple. Register with Yealink, create a username and password, then log in and request removal of the device mac from the RPS service and they will do it.
Let me know if you managed it
RE: RPS MAC Removal - bshaske - 02-14-2023 02:13 AM
I have the same kind of issue Right now I have 3 of the approx 100 phones that are tied to some other phone provider and the BVoIP Zero touch portal can't take over the phones untill Yealink removes them from RPS. Please help we can't factory reset these 3 phones.
RE: RPS MAC Removal - aaronmedina - 04-12-2023 05:27 PM
Do I have to go to the counter to restore my sims?
RE: RPS MAC Removal - curtcar21 - 01-27-2024 04:51 AM
I have a yealink account but not an rps account. I am trying to use phone on 3cx as we are a 3cx dealer. I can not get phone released
Can anyone help me. Please and Thank you
I have a yealink account but not an rps account. I am trying to use phone on 3cx as we are a 3cx dealer. I can not get phone released
RE: RPS MAC Removal - bitminder - 01-31-2024 06:21 PM
(01-27-2024 04:51 AM)curtcar21 Wrote: I have a yealink account but not an rps account. I am trying to use phone on 3cx as we are a 3cx dealer. I can not get phone released
Can anyone help me. Please and Thank you
I have a yealink account but not an rps account. I am trying to use phone on 3cx as we are a 3cx dealer. I can not get phone released
I have the same issue.
@Yealink Support: Please, inform, where to register an RPS account.
RE: RPS MAC Removal - seraphim19 - 02-01-2024 10:46 PM
(01-31-2024 06:21 PM)bitminder Wrote:(01-27-2024 04:51 AM)curtcar21 Wrote: I have a yealink account but not an rps account. I am trying to use phone on 3cx as we are a 3cx dealer. I can not get phone released
Can anyone help me. Please and Thank you
I have a yealink account but not an rps account. I am trying to use phone on 3cx as we are a 3cx dealer. I can not get phone released
I have the same issue.
@Yealink Support: Please, inform, where to register an RPS account.
I believe you must open a ticket with Yealink : http://ticket.yealink.com/
Or, if you have a distributor, you can talk to them and they can help set you up.
RE: RPS MAC Removal - echotech - 04-29-2024 05:36 PM
Did this ever get resolved???
I have the same issue. 3CX reseller. I have asked my trunk provider (BreezeConnect) to help set me up an account. But when I request the MAC for a phone to be removed via the ticketing system, I add the mac and serial number, then hit submit, but then get asked for either and RPS account and RPS password, or to use an AccessKey ID to authenticate. My trunk provider doesn't know what that means so they just submit a release request through their systems, but it's not convenient. Any help would be great.
Regards,
Rob.
RE: RPS MAC Removal - bravetech - 07-23-2024 03:51 PM
You will need a RPS Account to do this. Or you will first need to createa a ticket to have them removed and/or to request an RPS Account.
Go Here:
https://ticket.yealink.com/portal/mac-removal
Notice from that site:
1. You can use your own RPS account to delete MAC addresses that were bound to another enterprise.
2. One Ticket account is only allowed to release 20 MAC addresses from the RPS in 24 hours.
3. If any problems with this self-service tool or there are more MAC addresses that need to release urgently, please click HERE to create a Ticket.
Hope that helps!