EXP40 Page confusion - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Phone specific topic (/forumdisplay.php?fid=12) +--- Thread: EXP40 Page confusion (/showthread.php?tid=4561) |
EXP40 Page confusion - plewis@bcradesign.com - 09-01-2015 02:02 AM When Page 1 is selected, pressing a key on that page actually rings someone in the same position on Page 2. E.g. Aaron is in the first position on Page 1, and Dave's in the first position on Page 2. Pressing Aaron's button dials Dave. We note this problem on 2 different EXP40 connected to the same T48G. Please advise! Thanks, Phil RE: EXP40 Page confusion - Yealink_Michael - 09-01-2015 05:42 AM hi for this issue, we have test in our side , it works fine please upgrade the T48 to the last firmware 35.80.0.70, download link : http://support.yealink.com/attachmentDownload/download?path=upload%2Fattachment%2F2015-8-7%2F6%2F6fd4cb37-b21d-41e7-a882-acadfdb0729a%2FT48-35.80.0.70.zip then reset to test if issue still exist , please upgrade the firmware of EXP40 with a T46, please refer to the guide below : http://forum.yealink.com/forum/showthread.php?tid=1414 RE: EXP40 Page confusion - plewis@bcradesign.com - 09-01-2015 06:17 AM (09-01-2015 05:42 AM)Yealink_Michael Wrote: hi We use 3cx and have upg firmware and reset phones. The issue is intermittent but has happened a couple of times, Reception is losing confidence in the EXP40. We only have T48G, no T46. RE: EXP40 Page confusion - plewis@bcradesign.com - 09-24-2015 11:11 PM (09-01-2015 06:17 AM)plewis@bcradesign.com Wrote:This continues to be a problem.(09-01-2015 05:42 AM)Yealink_Michael Wrote: hi Is there no other way to upgrade the firmware? We do not own a t46! RE: EXP40 Page confusion - plewis@bcradesign.com - 09-30-2015 01:34 AM This continues to be a problem. Is there no other way to upgrade the firmware? We do not own a t46! RE: EXP40 Page confusion - plewis@bcradesign.com - 10-20-2015 07:41 AM I found a T46 to borrow, I'll be upg. the firmware on the EXP 40 tomorrow. FYI the problem is VERY intermittent so your quick test will not present the issue. It only happens once every couple of weeks. Thanks, Phil RE: EXP40 Page confusion - eth0 - 11-27-2015 06:57 PM Same Problem here. Yealink T48G Firmware Version 35.80.0.72 (because of BLF issue on EXP40) EXP40 1 Hardware Version 66.0.0.0 EXP40 1 Firmware Version 7.16.0.0 |