+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: Enable/Disable Multicast from programable button (/showthread.php?tid=45523)
Enable/Disable Multicast from programable button - bshaske - 11-23-2021 11:31 PM
Thanks for any input here,
I have an application where the customer wants to do multicast paging to the phones but also wants to have the availability of users to be able to enable / disable multicast music on their phone. Right now I can subscribe to both the paging stream and the music stream but it has to be done thru provisioning. I am looking for a way to allow each user to be able to log in or out of a multicast stream (in this case music) with a button press on the phone.
Any Ideas?
RE: Enable/Disable Multicast from programable button - krunkerio - 01-19-2022 05:28 PM
Hello. First off, the best setting for multicast rate for your router is usually the lowest amount. Lower Mbps value will typically benefit your normal web uses like browsing or file loading. In this case, You should turn off or disable IGMP Snooping and set the multicast rate to be fixed at the lowest value possible.
krunker