Yealink Forums
Screensaver Wait time on T46S - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: Screensaver Wait time on T46S (/showthread.php?tid=45453)



Screensaver Wait time on T46S - remi-it - 10-20-2021 07:52 PM

We have clients who want the screensaver / clock to appear on the phone after 15 seconds of idle time. This is something that used to be possible on T46S, and it is possible on T46G. The latest firmware version only allows a minimum wait time of 30 minutes, which isn't acceptable to this particular client. Is there any way to change it to be customizable to any range of seconds? Or to bring the old options back?
Thank you.


RE: Screensaver Wait time on T46S - complex1 - 10-20-2021 09:26 PM

(10-20-2021 07:52 PM)remi-it Wrote:  We have clients who want the screensaver / clock to appear on the phone after 15 seconds of idle time. This is something that used to be possible on T46S, and it is possible on T46G. The latest firmware version only allows a minimum wait time of 30 minutes, which isn't acceptable to this particular client. Is there any way to change it to be customizable to any range of seconds? Or to bring the old options back?
Thank you.

Hi,

According to the Admin Guide the minimum Screensaver Wait time is still 15 sec.
Web UI: Settings > Preference > Screensaver Wait Time
Parameter: screensaver.wait_time =


RE: Screensaver Wait time on T46S - remi-it - 10-20-2021 09:33 PM

OK we were able to get it to work through provisioning.
On the web interface of the phone, it does not let you select 15sec, the lowest time is 30min.
But we were able to push 15sec still through provisioning.
Thank you.


RE: Screensaver Wait time on T46S - complex1 - 10-21-2021 01:49 AM

(10-20-2021 09:33 PM)remi-it Wrote:  OK we were able to get it to work through provisioning.
On the web interface of the phone, it does not let you select 15sec, the lowest time is 30min.
But we were able to push 15sec still through provisioning.
Thank you.

Hi,

Yes, I can replicate the "issue".
Using the WEB UI then 30 min. is the lowest selectable value and this is not according the Admin Guide.
Using provisioning then you can select 15 sec.