Beep after ringing when call is answered - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: Dect Phone Series (/forumdisplay.php?fid=6) +--- Forum: W60B(Wireless) (/forumdisplay.php?fid=59) +--- Thread: Beep after ringing when call is answered (/showthread.php?tid=45419) Pages: 1 2 |
Beep after ringing when call is answered - cinergi - 10-06-2021 09:03 AM I have a W60B with W56H handsets. I recently upgraded the firmware to the latest versions 77.85.0.25 (base) and 61.85.0.20 (handsets). Now, whenever I make an outgoing call, when the call is answered by the remote party I hear a beep in my W56H earpiece. The phone otherwise works normally, it's just annoying hearing a beep whenever the remote party answers the call. The sound is the same as the call waiting beep. How can I turn this off? Thanks RE: Beep after ringing when call is answered - complex1 - 10-06-2021 06:33 PM (10-06-2021 09:03 AM)cinergi Wrote: I have a W60B with W56H handsets. I recently upgraded the firmware to the latest versions 77.85.0.25 (base) and 61.85.0.20 (handsets). Now, whenever I make an outgoing call, when the call is answered by the remote party I hear a beep in my W56H earpiece. The phone otherwise works normally, it's just annoying hearing a beep whenever the remote party answers the call. The sound is the same as the call waiting beep. How can I turn this off? Hi, Please factory reset the base and handset, then re-provision the set and try again. Rule of thumb: always reset the phone after a firmware upgrade to avoid "upgrade" issues. RE: Beep after ringing when call is answered - cinergi - 10-06-2021 08:32 PM (10-06-2021 06:33 PM)complex1 Wrote:(10-06-2021 09:03 AM)cinergi Wrote: I have a W60B with W56H handsets. I recently upgraded the firmware to the latest versions 77.85.0.25 (base) and 61.85.0.20 (handsets). Now, whenever I make an outgoing call, when the call is answered by the remote party I hear a beep in my W56H earpiece. The phone otherwise works normally, it's just annoying hearing a beep whenever the remote party answers the call. The sound is the same as the call waiting beep. How can I turn this off? Thanks, I will try that. RE: Beep after ringing when call is answered - support@icona.co.nz - 11-30-2021 05:58 AM (10-06-2021 08:32 PM)cinergi Wrote:(10-06-2021 06:33 PM)complex1 Wrote:(10-06-2021 09:03 AM)cinergi Wrote: I have a W60B with W56H handsets. I recently upgraded the firmware to the latest versions 77.85.0.25 (base) and 61.85.0.20 (handsets). Now, whenever I make an outgoing call, when the call is answered by the remote party I hear a beep in my W56H earpiece. The phone otherwise works normally, it's just annoying hearing a beep whenever the remote party answers the call. The sound is the same as the call waiting beep. How can I turn this off? Did you find a resolution to this issue? What were the beeps relating to? RE: Beep after ringing when call is answered - kchronister - 12-03-2021 05:13 AM I have the same issue. W60B on 77.85.0.61 and W56H on 61.85.0.20. When I make a call, and the caller answers or goes to voicemail, I hear a tone (like call waiting tone). I have factory reset the base and reset the handset, but tone after call answered or voicemail picks up continues. RE: Beep after ringing when call is answered - cinergi - 12-03-2021 05:56 AM The only thing that fixed it for me is to downgrade the BS and handsets to a previous SW version. RE: Beep after ringing when call is answered - kchronister - 12-03-2021 06:20 AM (12-03-2021 05:56 AM)cinergi Wrote: The only thing that fixed it for me is to downgrade the BS and handsets to a previous SW version. Thank-you! RE: Beep after ringing when call is answered - support@icona.co.nz - 12-20-2021 12:07 PM We are still getting this issue, what is the cause? What is the fix? Have tried factory reset, firmware downgrade Also have tried these settings in config... features.voice_mail_tone_enable=0 call_waiting.enable=0 call_waiting.tone=0 account.1.subscribe_mwi_to_vm=0 RE: Beep after ringing when call is answered - markvdheijden - 01-21-2022 04:34 PM You should be able to disable it by the setting below: phone_setting.outgoing_call_answer_tone.enable = 0 It enables and disables the call connection beep tone when receiving the outgoing call. The permitted values are 0 and 1. 0--enabled 1--disabled RE: Beep after ringing when call is answered - woodgee - 03-09-2022 10:22 PM hello, i have the same beeps. W70B on 146.85.0.20 and W56H on 61.85.0.35. the "phone_setting.outgoing_call_answer_tone.enable = 0" don´t fix the beeping. in a german forum, i found that: https://www.ip-phone-forum.de/threads/doppelton-wenn-angerufener-abhebt-w60b-u-w56h-hinter-lancom-router.310810/page-2 there seems to be other firmware versions that fix the problem. W73H-116.85.0.32.rom W59R-115.85.0.49.rom W56H-61.85.0.49.rom yealink can you please send me the firmware or link it in the firmware download pages. thanks |