+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Auto Provisioning (/forumdisplay.php?fid=14)
+--- Thread: static.auto_provision.allsettings (/showthread.php?tid=45261)
static.auto_provision.allsettings - alexgrad - 07-20-2021 02:49 AM
A few questions.
1. Is it possible to request the device to report the current internal configuration to the provisioning server using SIP NOTIFY request?
Like Cisco SIP NOTIFY message with the Event: report.
2. Is there a configuration parameter for static.auto_provision.allsettings to report ALL settings (now only settings other than default)?
Like Cisco Report Rule.
3. Is there a configuration parameter for static.auto_provision.allsettings to report settings in XML format?
4. Is there a schema for all configuration parameters with a type of parameter, all available values and a default value?
RE: static.auto_provision.allsettings - complex1 - 07-20-2021 07:55 PM
(07-20-2021 02:49 AM)alexgrad Wrote: A few questions.
1. Is it possible to request the device to report the current internal configuration to the provisioning server using SIP NOTIFY request?
Like Cisco SIP NOTIFY message with the Event: report.
2. Is there a configuration parameter for static.auto_provision.allsettings to report ALL settings (now only settings other than default)?
Like Cisco Report Rule.
3. Is there a configuration parameter for static.auto_provision.allsettings to report settings in XML format?
4. Is there a schema for all configuration parameters with a type of parameter, all available values and a default value?
Hi,
1. No, not that I know of.
2. Yealink IP phones can provide feedback in a variety of forms such as log files, packets, status indicators and so on.
You can find this in the "Settings > Configuration" tab.
3. No, not that I know of.
4. Consult the Admin Guide of the phone you have.