+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+---- Forum: T2xP Series (/forumdisplay.php?fid=21)
+---- Thread: Asterisk Transfer and callerid (/showthread.php?tid=452)
Asterisk Transfer and callerid - rasheed8777 - 05-14-2013 11:23 PM
Hello,
we have a Yealink T22 phone configured with asterisk 1.8 . It was noticed that if we do an attended transfer, the caller id from the external line is not passing to the T22 phone which finally got the call transfered. Any configuration to be done to get this working?
Best Regards
Abdul Rasheed
RE: Asterisk Transfer and callerid - Yealink Support - 05-27-2013 11:29 AM
Hello,
You can upgrade to our latest firmware 7.70.0.140 which can support this:
http://www.yealink.com/Upload/firmware/T2X/7.70.0.140.zip
Thanks.
RE: Asterisk Transfer and callerid - mike366 - 11-25-2013 05:56 AM
What about for t46g, we have this same issue.
RE: Asterisk Transfer and callerid - Yealink Support - 11-25-2013 02:42 PM
Hi mike366,
A call to B,
B pick up the call,
then B transfer to C
The attended/ semi-attended transfer are done by the asterisk server.
so C just can receive the invite from B not A,
then B will display in the LCD of phone.
So it is up to the mode of server but not phone.
RE: Asterisk Transfer and callerid - mike366 - 11-26-2013 12:06 AM
OK, anyone know how to set that up in the server, freepbx?