Yealink Forums
VP59 Teams camera led - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+--- Thread: VP59 Teams camera led (/showthread.php?tid=45039)



VP59 Teams camera led - itnyou_pierre - 04-08-2021 05:45 PM

Hello,

It looks like the camera led on VP59 Teams edition remain fixed green only when properly working, as read from user guide :
"The camera is inserted and detected successfully on the phone—green"

Any chance to get the same behavior as the VP59 SIP version (event partially, like fixed red when video is on) as een in the user guide :

Solidgreen :
.The phone is powered on and the camera is properly connected to the phone.
.The camera is idle.
.The phone receives an audio-only call.
Flashing green :
. The phone receives a video call.
Solid red :
.There is an active video call.

.The video call is muted.
.The video call is held.
Slowly-flashing red :
.The shutter switch is open, but the near-site video is stopped transmitting during a video call.
.The video call is placed on hold.
Off
.The phone is powered off.
.The camera is not properly connected to the phone.
The shutter switch is closed.

Thank you for any input.
Pierre.