T38 Paging - Feedback and Noisy - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Phone specific topic (/forumdisplay.php?fid=12) +--- Thread: T38 Paging - Feedback and Noisy (/showthread.php?tid=4497) |
T38 Paging - Feedback and Noisy - kinetixryan - 08-26-2015 02:35 AM Hello all, I just did a new install of 16 Yealink T38's firmware 38.70.0.221 using 3cx cloud server v12. When using the paging feature i am getting a lot of feedback and noise. Is so much to where the customer can not use the paging feature. Anyone have any suggestions on this issue? RE: T38 Paging - Feedback and Noisy - CWR - 08-26-2015 12:08 PM Paging as in *9 or Paging as in Multicast? RE: T38 Paging - Feedback and Noisy - kinetixryan - 08-26-2015 08:57 PM Its a ring group for paging and all of the phones are in the ring group. Not using Multicast RE: T38 Paging - Feedback and Noisy - CWR - 08-26-2015 10:52 PM This happens from any phone that you initiate the paging on? RE: T38 Paging - Feedback and Noisy - kinetixryan - 08-27-2015 02:35 AM Yes. I was reading a few different posts and some people were talking about side tone. Could this be the issue? |