Enhanced DSS keys - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: General topics (/forumdisplay.php?fid=15) +--- Thread: Enhanced DSS keys (/showthread.php?tid=44896) |
Enhanced DSS keys - tvanvickle - 02-19-2021 03:25 AM We use mainly yealink 48s on our HPBX via metaswitch and have successfully done a few macro strings like below for our conference bridge. Which is a 7 digit phone number followed by a pause the moderator code followed by #. I'm looking to do something similar with a remote call forward button but it is a little more involved. It would require 7 digit phone number, then enter 10 digit phone number followed by pound, then enter 4 digit pin followed by pound... then feature code which is *72 and hangup. This is what we use for our conferenc bridge. XXXXXXX$Cwc$$Cp3$XXXXXX#$Tdtmf$ and it works great. I've tried multiple attempts with the above and my problem seems to be when entering the 10 digit number it grabs a second "line" and dials it while putting the first one on hold. Thanks in advance. |