+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: T46s Not showing DND status to other users (/showthread.php?tid=44874)
T46s Not showing DND status to other users - vgraham - 02-03-2021 01:31 AM
Problem – when selecting "Do Not Disturb" on the physical phone, the calls will go to voicemail when that phone number is dialed directly or by extension, however the line still shows "available" or green to the rest of the team members. We would like to have DND show to the rest of the phones that the user is NOT available for calls the same as if the line was busy.
Is there a way to make this happen?
RE: T46s Not showing DND status to other users - Albert_Yealink - 02-23-2021 08:08 PM
(02-03-2021 01:31 AM)vgraham Wrote: Problem – when selecting "Do Not Disturb" on the physical phone, the calls will go to voicemail when that phone number is dialed directly or by extension, however the line still shows "available" or green to the rest of the team members. We would like to have DND show to the rest of the phones that the user is NOT available for calls the same as if the line was busy.
Is there a way to make this happen?
Hi Vgraham,
This is Albert from Yealink.
DND feature enables the phone to reject all incoming calls automatically when you do not want to be interrupted. But you still can make an outgoing call. So the line will show Green and the LCD will show "DND mode is enabled" to notice that you are in DND status.
If you want to enable the DND in all lines, please login Phone Web UI, Features→Forward&DND→DND→Mode, choose "Phone", then DND again.
Best Regards,
Albert
RE: T46s Not showing DND status to other users - Yisroel_MongoTEL - 02-24-2021 03:41 AM
Hi Albert,
I wasn't the one with the question, but the question is quite obvious something different from what you're pointing to.
He was asking on how he can get the BLF status indicator (on other phones) to show the status as Busy/Unavailable/Red when this phone is set to DND.
RE: T46s Not showing DND status to other users - Albert_Yealink - 02-24-2021 02:23 PM
(02-24-2021 03:41 AM)Yisroel_MongoTEL Wrote: Hi Albert,
I wasn't the one with the question, but the question is quite obvious something different from what you're pointing to.
He was asking on how he can get the BLF status indicator (on other phones) to show the status as Busy/Unavailable/Red when this phone is set to DND.
Thanks for your notice.
(02-03-2021 01:31 AM)vgraham Wrote: Problem – when selecting "Do Not Disturb" on the physical phone, the calls will go to voicemail when that phone number is dialed directly or by extension, however the line still shows "available" or green to the rest of the team members. We would like to have DND show to the rest of the phones that the user is NOT available for calls the same as if the line was busy.
Is there a way to make this happen?
Hi Vgrahm,
If your question is the same as Yisroel said.
I suggset that you should contact your VOIP Service Provider to confirm taht whether server supports BLF+DND, because it is feature on server side, it should be supported in server side.
Many Thanks,
Albert