+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: Call Park works on T22 but not a T42 (/showthread.php?tid=44853)
Call Park works on T22 but not a T42 - tbolick - 01-26-2021 02:31 AM
T22: version 7.73.0.50
T42: version 29.73.193.50
I have set up the line key for the T22 as Call Park : p-cid-XXXXXX
This does not have any of the choices for XSI or FAC or any other setup.
This works great, except it does not light up anything like I'd like.
The T42 however has the same setup, and fails. I can use Transfer with *70XXX to park to an extension, but I can't see any indication for it.
I'll probably end up using a different phone for rollout, but I am trying to get it working on what I have.
Tom...
RE: Call Park works on T22 but not a T42 - Yisroel_MongoTEL - 01-29-2021 10:19 PM
Are you using Broadsoft PBX?
Firmware version 29.73.193.50 is a specialized Broadsoft firmware. The normal firmware for the T42G is 29.83.0.120.