+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+---- Forum: T2xP Series (/forumdisplay.php?fid=21)
+---- Thread: Using SIP-T29G with SangomaOS (parked calls) (/showthread.php?tid=44824)
Using SIP-T29G with SangomaOS (parked calls) - Shawn - 01-09-2021 08:24 AM
We have a working SangomaOS PBX (installed from .ISO)
The system is working as expected.
We have setup parking (70), and we have (3) parking lots (71,72,73).
GOAL: When a call is PARKED and put in a LOT: have the IP endpoint's button for the LOT (blink RED)
NOTE: Yealink phones go from solid green to solid red
NOTE: Fanvil phones go from solid green to blinking red
---------------------------------------------------
We have (8) phones (local) on the same LAN as the PBX
4 of the phones are: Yealink SIP-T29G
4 of the phones are: Fanvil X6u
---------------------------------------------------
We have working parking BLF/DSS keys for the (3) parking lots on all (8) phones
Example:
Yealink (button 5) = BLF / 71 (button is solid GREEN)
Yealink (button 5) = BLF / 72 (button is solid GREEN)
Yealink (button 5) = BLF / 73 (button is solid GREEN)
Example:
Fanvil (button 1) = BLF / 71 (button is solid GREEN)
Fanvil (button 1) = BLF / 72 (button is solid GREEN)
Fanvil (button 1) = BLF / 73 (button is solid GREEN)
---------------------------------------------------------
When staff PARKS a call to (70) and it is assigned to lot (71):
Yealink phone button for (71) goes from solid GREEN (to) solid RED
Fanvil phone button for (71) goes from solid GREEN (to) blinking RED
No GUI options are available on Yealink phones (to setup what state lights can be in)
NOTE: Only BLF MODE exists (and) none of the options other than mode 1 work
Direct GUI options are available on Fanvil phones (to setup) what state lights can be in
NOTE: The default option for 'parked' calls (using the drop down) is to: "blink RED"
------------------------------------------------------------
Question:
How can we get Yealink phones to "blink" RED (vs) solid RED for "parking lot calls"?
-------------------------------------------------------------