Custom DSS Key for 3CX - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: T5X Series (/forumdisplay.php?fid=58) +--- Thread: Custom DSS Key for 3CX (/showthread.php?tid=44585) |
Custom DSS Key for 3CX - EDOX - 10-20-2020 02:18 PM Hello i need to put some DSSkey on my T58A but 3CX have not the good type, on the T58 web ui is it ok but 3CX write autoprovisionning and erase my configuration. i test to do an Custom Template but the custom linekey not view on the T58. i use this : #Configure Line Key3 {IF blf3} linekey.3.line = 0 linekey.3.value = 8888* linekey.3.pickup_value = linekey.3.type = 11 linekey.3.label = DTMF linekey.3.extension = or #Configure Line Key2 {IF blf2} linekey.2.line = 1 linekey.2.value = http://192.168.1.102/api/camera/snapshot?width=640&h linekey.2.pickup_value = linekey.2.type = 17 linekey.2.label = Visu linekey.2.extension = Thanks for your help. RE: Custom DSS Key for 3CX - complex1 - 10-20-2020 03:04 PM (10-20-2020 02:18 PM)EDOX Wrote: Hello Hi, 3CX template "Yealink.T5x.ph" support linekey.x parameters, so you can create a customize template and set up these parameters. Because your question is specific for 3CX I recommend to post your question on the 3CX forum. |