+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T5X Series (/forumdisplay.php?fid=58)
+--- Thread: Call Forward Popup v85 Firmware (/showthread.php?tid=44557)
Call Forward Popup v85 Firmware - seraphim19 - 10-15-2020 01:38 PM
Hello I updated to the newest v85 firmware on a T57W device and i am now seeing a call forwarding message being displayed. Is there a parameter to enable or disable this message?
![[Image: Qpb7ShS.jpg]](https://i.imgur.com/Qpb7ShS.jpg)
Thanks
RE: Call Forward Popup v85 Firmware - complex1 - 10-15-2020 03:06 PM
Hi,
There is no parameter to enable or disable this message.
If you forward incoming calls on the phone, the call forward icon appears in the statusbar. ForT57W/T54W, the phone also prompts you that call forward is enabled.
Hope this will help.
RE: Call Forward Popup v85 Firmware - seraphim19 - 10-15-2020 04:31 PM
(10-15-2020 03:06 PM)complex1 Wrote: Hi,
There is no parameter to enable or disable this message.
If you forward incoming calls on the phone, the call forward icon appears in the statusbar. ForT57W/T54W, the phone also prompts you that call forward is enabled.
Hope this will help.
Yikes... okay. Thats too bad, I had hoped that it could be disabled and show the status bar icon only.
Thanks.