+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: confused with registration (/showthread.php?tid=44468)
confused with registration - Brian1949 - 09-22-2020 10:23 AM
I had problems this morning registering a trunk to, lets call it Sip3.VSP.com.au on one of our phones to, lets say EXT 1234 yet I successfully registered to EXT 1234 using Sip4.VSP.com.au
I tried another phone and I successfully and quickly registered to EXT 1234 using Sip3.VSP.com.au
The phones were Yealink T48G (wouldnt register via sip3) and Yealink T46G (instantly registered via Sip3)
Any thoughts on why this would happen?
Just curious
RE: confused with registration - terraformer - 09-22-2020 10:56 AM
The problem could be anywhere from your phone through your firewall to your provider.
My T48S sometimes happen to have a hiccup with account configuration, i.e. fail to register an account. But this only happened after I changed an account, e.g. changed the server IP, and issued provisioning. In such cases, I reset the T48S and after first provisioning everything is fine.
RE: confused with registration - complex1 - 09-22-2020 04:10 PM
(09-22-2020 10:23 AM)Brian1949 Wrote: I had problems this morning registering a trunk to, lets call it Sip3.VSP.com.au on one of our phones to, lets say EXT 1234 yet I successfully registered to EXT 1234 using Sip4.VSP.com.au
I tried another phone and I successfully and quickly registered to EXT 1234 using Sip3.VSP.com.au
The phones were Yealink T48G (wouldnt register via sip3) and Yealink T46G (instantly registered via Sip3)
Any thoughts on why this would happen?
Just curious
Hi Brian,
First thought: Check the DNS settings in your phone.
RE: confused with registration - BillMorrison - 09-25-2020 01:39 PM
If you use a SIP FQDN in trunk settings try with provider IP adress instead.