+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: security.user_password dosn't work since 85.0.5 ROM (/showthread.php?tid=44463)
security.user_password dosn't work since 85.0.5 ROM - proofy - 09-21-2020 08:13 AM
Ich habe I have updated the T46S to the latest version with the ROM T46S(T48S,T42S,T41S)-66.85.0.5.rom
After that the LDAP search filter finally worked, if it is a bit longer.
But now I have another problem, that with the provisioning parameter (security.user_password) the admin password for the phone can't be set anymore.
This leads after the reboot to an error message in the phone that the default password is still used and you have to set the password manually. This is of course not practicable with many phones.
So how can you set the admin password after the upgrade with the provisioning?
RE: security.user_password dosn't work since 85.0.5 ROM - complex1 - 09-21-2020 10:15 AM
(09-21-2020 08:13 AM)proofy Wrote: Ich habe I have updated the T46S to the latest version with the ROM T46S(T48S,T42S,T41S)-66.85.0.5.rom
After that the LDAP search filter finally worked, if it is a bit longer.
But now I have another problem, that with the provisioning parameter (security.user_password) the admin password for the phone can't be set anymore.
This leads after the reboot to an error message in the phone that the default password is still used and you have to set the password manually. This is of course not practicable with many phones.
So how can you set the admin password after the upgrade with the provisioning?
Hi,
Please reset the phone to factory default by long press (>10sec) the OK button, re-provisioning it and try again.
Hope this will help.
RE: security.user_password dosn't work since 85.0.5 ROM - proofy - 09-22-2020 02:16 PM
(09-21-2020 10:15 AM)complex1 Wrote: Please reset the phone to factory default by long press (>10sec) the OK button, re-provisioning it and try again.
Hope this will help.
Thank you very much for the proposal.
Unfortunately, that did not work either.
My solution now is to go back to an older firmware (84) .
RE: security.user_password dosn't work since 85.0.5 ROM - Yisroel_MongoTEL - 09-22-2020 06:18 PM
Is the admin password you set not working, or it's just that the Default Password prompt come up?
RE: security.user_password dosn't work since 85.0.5 ROM - proofy - 09-23-2020 06:25 AM
(09-22-2020 06:18 PM)Yisroel_MongoTEL Wrote: Is the admin password you set not working, or it's just that the Default Password prompt come up?
Setting the admin's password does not work with Auto Provisioning.
It works with V84. After upgrading the firmware to V85 it does not work anymore and the phone gets the default password. The phone will then of course display this as a warning in the form of a red triangle and the staff will call you to tell you what is wrong with your phone. You can set the admin password manually in the Web-UI. But this is not a solution for many phones.
RE: security.user_password dosn't work since 85.0.5 ROM - complex1 - 09-23-2020 09:08 AM
(09-23-2020 06:25 AM)proofy Wrote:(09-22-2020 06:18 PM)Yisroel_MongoTEL Wrote: Is the admin password you set not working, or it's just that the Default Password prompt come up?
Setting the admin's password does not work with Auto Provisioning.
It works with V84. After upgrading the firmware to V85 it does not work anymore and the phone gets the default password. The phone will then of course display this as a warning in the form of a red triangle and the staff will call you to tell you what is wrong with your phone. You can set the admin password manually in the Web-UI. But this is not a solution for many phones.
Please check your provisioning template.
Set up for admin password in v85 is the same as in v84.
static.security.user_password =
Hope this will help.
RE: security.user_password dosn't work since 85.0.5 ROM - Daryl_Yealink - 09-23-2020 12:39 PM
Dear Customer,
This is Daryl from Yealink Support Team, nice to work with you.
I have tested the parameter on my T46S with the firmware 66.85.0.5 but it can set the admin password normally by auto p.
I have added my cfg file to the this google drive, please check and test again with it.
https://drive.google.com/file/d/1UPX9sjE2smMyaU84qUu89yVMzs42H1sL/view?usp=sharing
If it still donsn't work, I may need your help to reproduce the issue and offer us some diagnostic files for further analysis.
Please refer to below FAQ on how to obtain the files:
http://support.yealink.com/faq/faqInfo?id=707
The specific Operations: log in the web GUI-> Settings->Configuration-> change the local log level to 6-> Confirm-> press Start-> Auto Provision->set the password by auto provision->Configuration-> press Stop-> Export All Diagnostic Files-> send to me.
Best Regard,
Daryl
RE: security.user_password dosn't work since 85.0.5 ROM - Daryl_Yealink - 09-29-2020 03:41 AM
Dear Customer,
It has been a long time not received your message, may I know how it is going?
Any problem you meet please feel free to let me know at first time.
Best Regards,
Daryl