Yealink Forums
Cannot stop T58 Red LED Flashing - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T5X Series (/forumdisplay.php?fid=58)
+--- Thread: Cannot stop T58 Red LED Flashing (/showthread.php?tid=44331)

Cannot stop T58 Red LED Flashing - ENFORCER - 08-13-2020 09:17 AM

Hi,
I have 16 x T58's deployed in a home.
We have been trying to stop the red status light from flashing, aside from inbound calls.
However, after a period of time, all the handsets will start to flash red slowly.
I have removed any missed calls indicators from the PBX (Vodia)
It seems to be with the T58 handsets. All are on FW 58.85.0.5

I have the following in the cfg:
phone_setting.common_power_led_enable = 0
phone_setting.talk_and_dial_power_led_enable = 0
phone_setting.mail_power_led_flash_enable = 0
phone_setting.ring_power_led_flash_enable = 1
phone_setting.mute_power_led_flash_enable= 0
phone_setting.hold_and_held_power_led_flash_enable = 0
phone_setting.missed_call_power_led_flash.enable = 0

Is there any way to see what is causing this red light ?
Help

Thanks

RE: Cannot stop T58 Red LED Flashing - complex1 - 08-13-2020 10:16 AM

(08-13-2020 09:17 AM)ENFORCER Wrote:  Hi,
I have 16 x T58's deployed in a home.
We have been trying to stop the red status light from flashing, aside from inbound calls.
However, after a period of time, all the handsets will start to flash red slowly.
I have removed any missed calls indicators from the PBX (Vodia)
It seems to be with the T58 handsets. All are on FW 58.85.0.5

I have the following in the cfg:
phone_setting.common_power_led_enable = 0
phone_setting.talk_and_dial_power_led_enable = 0
phone_setting.mail_power_led_flash_enable = 0
phone_setting.ring_power_led_flash_enable = 1
phone_setting.mute_power_led_flash_enable= 0
phone_setting.hold_and_held_power_led_flash_enable = 0
phone_setting.missed_call_power_led_flash.enable = 0

Is there any way to see what is causing this red light ?
Help

Thanks

Hi,

Please try next settings:
features.power_saving.power_led_flash.on_time = 0
features.power_saving.power_led_flash.off_time = 3000

Hope this will help.

RE: Cannot stop T58 Red LED Flashing - ENFORCER - 08-13-2020 12:10 PM

Yep, That fixed it.
Thanks