+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T5X Series (/forumdisplay.php?fid=58)
+--- Thread: Yet another T58A won't autoprovision Firmware Update (/showthread.php?tid=44286)
Yet another T58A won't autoprovision Firmware Update - Techlogik - 08-06-2020 02:19 PM
Everything else works just fine. URL is set. I have the settings in the mac.cfg file, the y000000000058.cfg, common.cfg file everywhere imaginable.
Seems to look at the mac.cfg file on my setup. It will pull down the other items from an http server, like on hold music etc. Tried to point the autoprovision to the firmware on FTP/HTTP and TFTP...nothing works.
mac.cfg example:
static.auto_provision.server.url = tftp://192.168.1.56
static.firmware.url = tftp://192.168.1.56/T55A(T58A,T56A)-58.15.0.107.rom
Using Skype and Teams versions testing firmware for migration, and it will never query any servers. I see it hit the servers, http, ftp and tftp for the y000000000058.cfg file every time.
Any help or config info appreciated. Driving me insane. Docs haven't done any good, followed them very closely.
I should also open another thread about DHCP scope options and factory reset auto provision...I do this all day with our Polycom VVX 601s no problems...not Yealink.
But let us focus on just the firmware. The autoprovision works when I press autoprovision in the http interface, for something like, pointing to a different server etc..
It just won't ever take and update the firmware.
Thanks!