+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: T46S ring headset and speaker (/showthread.php?tid=44106)
T46S ring headset and speaker - michele-scapini - 06-04-2020 12:00 PM
In Version 66.85.0.5 (3cx pbx) when I configure the ringtone both in speaker and in headset it is heard only in the speaker. If I set the ringtone only in the headset it works.
The headset is a jabra Evolve 65 with the jabra link, but I also tried with a plantronics c3210
RE: T46S ring headset and speaker - complex1 - 06-04-2020 01:48 PM
(06-04-2020 12:00 PM)michele-scapini Wrote: In Version 66.85.0.5 (3cx pbx) when I configure the ringtone both in speaker and in headset it is heard only in the speaker. If I set the ringtone only in the headset it works.
The headset is a jabra Evolve 65 with the jabra link, but I also tried with a plantronics c3210
Hi,
I have read this in the admin guide and assuming you have set it accordingly?
"If the ringer device is set to Headset or Headset&Speaker, the headset (either a wired headset, Bluetooth headset or USB headset) should be connected to the IP phone and the headset mode also should be activated in advance."
RE: T46S ring headset and speaker - michele-scapini - 06-04-2020 02:01 PM
(06-04-2020 01:48 PM)complex1 Wrote:(06-04-2020 12:00 PM)michele-scapini Wrote: In Version 66.85.0.5 (3cx pbx) when I configure the ringtone both in speaker and in headset it is heard only in the speaker. If I set the ringtone only in the headset it works.
The headset is a jabra Evolve 65 with the jabra link, but I also tried with a plantronics c3210
Hi,
I have read this in the admin guide and assuming you have set it accordingly?
"If the ringer device is set to Headset or Headset&Speaker, the headset (either a wired headset, Bluetooth headset or USB headset) should be connected to the IP phone and the headset mode also should be activated in advance."
yes of course, if i set ring only in headset it works
RE: T46S ring headset and speaker - complex1 - 06-04-2020 02:59 PM
(06-04-2020 02:01 PM)michele-scapini Wrote:(06-04-2020 01:48 PM)complex1 Wrote:(06-04-2020 12:00 PM)michele-scapini Wrote: In Version 66.85.0.5 (3cx pbx) when I configure the ringtone both in speaker and in headset it is heard only in the speaker. If I set the ringtone only in the headset it works.
The headset is a jabra Evolve 65 with the jabra link, but I also tried with a plantronics c3210
Hi,
I have read this in the admin guide and assuming you have set it accordingly?
"If the ringer device is set to Headset or Headset&Speaker, the headset (either a wired headset, Bluetooth headset or USB headset) should be connected to the IP phone and the headset mode also should be activated in advance."
yes of course, if i set ring only in headset it works
Hi,
Please reset the phone to factory default, re-provisiong and try again.
RE: T46S ring headset and speaker - michele-scapini - 06-04-2020 04:02 PM
(06-04-2020 02:59 PM)complex1 Wrote:(06-04-2020 02:01 PM)michele-scapini Wrote:(06-04-2020 01:48 PM)complex1 Wrote:(06-04-2020 12:00 PM)michele-scapini Wrote: In Version 66.85.0.5 (3cx pbx) when I configure the ringtone both in speaker and in headset it is heard only in the speaker. If I set the ringtone only in the headset it works.
The headset is a jabra Evolve 65 with the jabra link, but I also tried with a plantronics c3210
Hi,
I have read this in the admin guide and assuming you have set it accordingly?
"If the ringer device is set to Headset or Headset&Speaker, the headset (either a wired headset, Bluetooth headset or USB headset) should be connected to the IP phone and the headset mode also should be activated in advance."
yes of course, if i set ring only in headset it works
Hi,
Please reset the phone to factory default, re-provisiong and try again.
i have this problem with 4 phones (all T46S) in 2 customers and with 2 model of headset (the plantronics and jabra)