W60B: "get_ip failed ret= -1" in system log - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: Dect Phone Series (/forumdisplay.php?fid=6) +--- Forum: W60B(Wireless) (/forumdisplay.php?fid=59) +--- Thread: W60B: "get_ip failed ret= -1" in system log (/showthread.php?tid=43950) |
W60B: "get_ip failed ret= -1" in system log - andrewju - 04-09-2020 12:01 PM Hi All, I initially created this topic in another sub-forum, so I'm posting it now here. The SysLog on my W60B has lots of these messages: Code: DEBS[974]: DESV<3+error > 036.105.251:get_ip failed ret= -1 These appear once a minute, every minute. LogLevel 6 around this error looks like this: Code: lach[328]: SRV <5+notice> 255.186.390:event:message=0x1,w=0x0,l=0x0 The W60B gets its IP address from a DHCP server (Mikrotik). It gets the address and renews it as expected, so I don't see any issues with that. But this error in the log makes me think something may be wrong... Can someone please advise what it means and whether I may need to take some actions to fix it? My W60B firmware version is 77.83.0.85, which seem to be the latest one currently available. RE: W60B: "get_ip failed ret= -1" in system log - complex1 - 04-09-2020 06:41 PM Hi, What I like to know is are you using OpenVPN? or try to reset to factory default and check again. RE: W60B: "get_ip failed ret= -1" in system log - andrewju - 04-09-2020 08:01 PM (04-09-2020 06:41 PM)complex1 Wrote: Hi, I don't use OpenVPN. I just did a factory reset, then I: - configured a SIP account (to my Asterisk machine) - set up Syslog to an external syslog server - configured time sync (NTP) That's it. I still see same errors in the log coming up every minute. RE: W60B: "get_ip failed ret= -1" in system log - complex1 - 04-10-2020 07:35 AM (04-09-2020 08:01 PM)andrewju Wrote:(04-09-2020 06:41 PM)complex1 Wrote: Hi, Hi, Please try again all steps but then without config a SIP account? (Reset, Syslog, NTP) Edit: Could also have to be something to do with certificates. Please downgrade the base to previous firmware version W60B-77.83.0.65.rom RE: W60B: "get_ip failed ret= -1" in system log - andrewju - 04-10-2020 09:41 AM (04-10-2020 07:35 AM)complex1 Wrote: Please try again all steps but then without config a SIP account? I did a factory reset, and then just added the Syslog server. The error message appeared again... Quote:Could also have to be something to do with certificates. Downgrading firmware to 77.83.0.65 makes no difference as well... I still see the message appearing in Syslog every minute. I have another W60B on this network. I just checked there, and it also throws these errors to the log. That device is currently running 77.83.0.10. RE: W60B: "get_ip failed ret= -1" in system log - complex1 - 04-10-2020 05:55 PM Hi Andre, Maybe an other forum member can chime in, but I think if you encounter no issues then leave it as it is. |