+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Auto Provisioning (/forumdisplay.php?fid=14)
+--- Thread: T4xx phones, load additional configuration after start possible? (/showthread.php?tid=43922)
T4xx phones, load additional configuration after start possible? - DanH - 04-03-2020 04:02 PM
T4xx phones, autoprovisioned by an asterisk based PBX.
Is there a way I can tell the phones to automatically load an additional .cfg file, after the phone has started, without touching the .cfg files on the provisioning server?
Problem is that I do not have direct access to the .cfg files on the server.
I can, however, setup a few single additional instructions via a module someone has written (like account.1.nat.udp_update_enable = 3). I am using this also to add a hosted phonebook (remote_phonebook.data.X.url..).
What I'd need is a way to add additional dsskey definitions and additional sip accounts which are not provisioned by the PBX.
Currently I have per-user .cfg files which I load manually via the web UI of each phone. This is very cumbersome and I am looking for a better way.
Is there one?
Thanks for any pointer
Dan