![]() |
Remote phonebook generator? - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: T4x Series (/forumdisplay.php?fid=31) +--- Thread: Remote phonebook generator? (/showthread.php?tid=43622) |
Remote phonebook generator? - kogarahchiro - 01-16-2020 07:11 AM I'm trying to find a remote phonebook generator but I'm having no luck. I'm using a T48S Firmware Version 66.83.0.35 Hardware Version 65.0.0.2.0.0.0 Thanks! RE: Remote phonebook generator? - complex1 - 01-16-2020 09:05 AM Please try this (very old) one: http://support.yealink.com/forward2download?path=ZIjHOJbWuW/DFrGTLnGyppoY/fcvJPPA6nnRNq8TST3CltD1nqhQfXb4CudTdYM4m1ozRNVSed/4VZ3wn0MZra4dNuHQ8aplusSymbolecUIGXxdxRJvndNgcbb2GLL72pNP5tStROI5YvrCgyUv/JZH1iplusSymbolIuADXktyEegmT4 Hope this will help. RE: Remote phonebook generator? - kogarahchiro - 01-17-2020 04:38 AM (01-16-2020 09:05 AM)complex1 Wrote: Please try this (very old) one: Unfortunately it does not ![]() The first problem is that the maximum contacts I can enter are 1000 because the cells afterwards are locked and I do not know the password to unlock it. (This is fine for a local phonebook, but I'm after ~5000 contacts on a remote phonebook). The second problem is that even if I tried to create a remote phonebook for anywhere up to the 1000 contacts allowed in its current form, pressing the 'Create Remote Phonebook' button gives the following error: Microsoft Visual Basic Compile error in module: ??1 Is there a newer/better way? How do most people do this? Thanks! |