T45 BLF linekey.x.extension syntax for type 13 - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Configuration (/forumdisplay.php?fid=24) +--- Thread: T45 BLF linekey.x.extension syntax for type 13 (/showthread.php?tid=43609) |
T45 BLF linekey.x.extension syntax for type 13 - SCPCJNR - 01-13-2020 08:24 PM Looking for information to program a BLF to dial a number, then an extension. Currently, my code looks like this linekey.16.label = Lucie linekey.16.type = 13 linekey.16.value = 6135559518 linekey.16.line = 1 linekey.16.extension = <12>258# I get it to work occasionally, but probably need to tweak the <12> value but can't find it's usage definition. Is it the number of seconds to wait before sending the DTMF 258 code? If so, measured from when? RE: T45 BLF linekey.x.extension syntax for type 13 - Yisroel_MongoTEL - 01-15-2020 04:10 PM (01-13-2020 08:24 PM)SCPCJNR Wrote: Looking for information to program a BLF to dial a number, then an extension. Currently, my code looks like this(T45 is not a real model...) Yes, the <12> is indeed to wait 12 secs before dialing the extension, and it is starting from the sec when you press the key. |