+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: Speed dial Key adds pickup code when it shouldn't (/showthread.php?tid=43488)
Speed dial Key adds pickup code when it shouldn't - chrischevy - 12-09-2019 02:57 PM
See https://community.freepbx.org/t/yealink-add-after-every-dss-key/63083 for reference
I have an issue with T46S and T54W phones.
When I configure a Speed Dial DSS Key, the pickup code (**) is dialed after the phone number, every time.
In the administration manual, here's what is mentionned for the linekey.x.extension
Parameter linekey.X.extension[1]
Description
For multicast paging:
It configures the channel of multicast paging group.
For BLF/BLF list/intercom feature:
It configures the pickup code.
Note: It is only applicable when “linekey.X.type” is set to 14, 16, 24 or 39. It is not
applicable to T19(P) E2 IP phones.
Speed dial is a type 13, so it shouldn't dial the pickup code, but it does. Also, there is no linekey.X.extension setting in the provisioning file.
Is this a known situation ?
RE: Speed dial Key adds pickup code when it shouldn't - JaredBusch - 12-10-2019 03:14 PM
I expanded on Chris' report in the FreePBX community.
While there is certianly an issue with their EPM populating the pickup_value field all the time, there is also a provable issue with the pickup_value getting cross populated into the extension field, even when the FreePBX EPM is not used.
Ticket opened.
https://ticket.yealink.com/page/question-detail.html?id=98409