+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Phone specific topic (/forumdisplay.php?fid=12)
+--- Thread: T46S multiple line - on hold issue (/showthread.php?tid=43445)
T46S multiple line - on hold issue - sprintership - 11-23-2019 01:17 AM
Experts,
i know I am missing something. I have three lines configured as:
linekey.1.value = 0
linekey.1.line = 1
linekey.1.type = 15
linekey.1.value = 0
linekey.2.line = 1
linekey.2.type = 15
linekey.2.value = 0
linekey.3.line = 1
linekey.3.type = 15
linekey.3.value = 0
If somebody 1 calls (line 1) I can put that on hold
if somebody 2 calls I cannot put that on hold = I can only swap it
if somebody 3 calls I can put that on hold
If I have all 3 lines I can all put on hold - how can I fix the option 2 with two lines = I would like to put second line on hold as well. I know I am missing something here.
RE: T46S multiple line - on hold issue - Yisroel_MongoTEL - 01-07-2020 05:19 PM
(11-23-2019 01:17 AM)sprintership Wrote: Experts,The advanced way to change this would probably be by working with the Custom SoftKey settings.
i know I am missing something. I have three lines configured as:
linekey.1.value = 0
linekey.1.line = 1
linekey.1.type = 15
linekey.1.value = 0
linekey.2.line = 1
linekey.2.type = 15
linekey.2.value = 0
linekey.3.line = 1
linekey.3.type = 15
linekey.3.value = 0
If somebody 1 calls (line 1) I can put that on hold
if somebody 2 calls I cannot put that on hold = I can only swap it
if somebody 3 calls I can put that on hold
If I have all 3 lines I can all put on hold - how can I fix the option 2 with two lines = I would like to put second line on hold as well. I know I am missing something here.
But why not just use the physical Hold button on the phone, which does work as expected without any issue?