Cannot get NTP to work Prodigy Mexico - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: General topics (/forumdisplay.php?fid=15) +--- Thread: Cannot get NTP to work Prodigy Mexico (/showthread.php?tid=43441) |
Cannot get NTP to work Prodigy Mexico - alegonzav - 11-21-2019 12:08 AM I have a serial of Phones T19; 23; 29G. Attached to a yearstar S1000. The problem is that I can´t do to have the phones sync the time. Firmware Version 44.84.0.90 DHCP Time Disable (have try enable) NTP by DHCP Priority high Primary Server pool.ntp.org Secondary Server 192.168.58.1 Update Interval (15~86400s) 1000 RE: Cannot get NTP to work Prodigy Mexico - complex1 - 11-21-2019 08:28 AM (11-21-2019 12:08 AM)alegonzav Wrote: I have a serial of Phones T19; 23; 29G. Attached to a yearstar S1000. Hi, Please try: Secondary Server: pool.ntp.org Time Zone: -6 DST: set if you have one Location: your time zone name other settings look fine. If above not work, please check the provision template in your PBX. Hope this will help. RE: Cannot get NTP to work Prodigy Mexico - Fraukas2 - 11-21-2019 04:55 PM Hello, Settings that are working with me is to have the DHCP Time to Disabled with Primary Server to 0.ca.pool.ntp.org along with Secondary Server to 0.us.pool.ntp.org RE: Cannot get NTP to work Prodigy Mexico - alegonzav - 12-05-2019 06:14 PM Sorry I didn´t answer before. I try this two options but neither worked. Any other suggestion? RE: Cannot get NTP to work Prodigy Mexico - complex1 - 12-05-2019 07:57 PM Are the phones use a valid DNS server? e.g. Prim DNS: 8.8.8.8 Sec DNS: 8.8.4.4 Please check the phone Status page. RE: Cannot get NTP to work Prodigy Mexico - alegonzav - 12-05-2019 08:17 PM This solve the problem!!! THANKS (12-05-2019 07:57 PM)complex1 Wrote: Are the phones use a valid DNS server? RE: Cannot get NTP to work Prodigy Mexico - complex1 - 12-05-2019 08:22 PM Cool. Glad to be of help. |