Yealink T48, Mutiple lines - Deny incomming calls. - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: T4x Series (/forumdisplay.php?fid=31) +--- Thread: Yealink T48, Mutiple lines - Deny incomming calls. (/showthread.php?tid=43403) |
Yealink T48, Mutiple lines - Deny incomming calls. - mojoJED - 11-11-2019 08:24 AM Hi, I've a Yealink T48S with 2 extensions. When im in a call on EXT 010 is there a way to deny incomming calls on 011 automatically. its a bit frustrating hearing this BEEP every 5 seconds. If im in a call i would never accept the second call (in this case) there must be a way to the the phone to decline incomming calls. Thanks alot /Morten RE: Yealink T48, Mutiple lines - Deny incomming calls. - jolouis - 11-13-2019 09:22 PM Why do you have two extensions setup if this is what you are after? Typically in this kind of scenario you setup a single account/extension, and then assign a few line keys to it. You then disable call waiting on the phone. This allows you to only get one incoming call at a time, but if you need to put the caller on hold and dial out to somebody else for something you can still do that. |