Yealink Forums
Recovery Mode - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: Recovery Mode (/showthread.php?tid=43271)



Recovery Mode - Challenger VoIP - 10-11-2019 06:33 PM

I am trying to recover some T46S phones using TFTP, i have the 3 files required, but every time i am getting an error message stating the ROM file is too BIG. does any one have any ideals please. This is what i am getting

Connection received from 192.168.1.100 on port 1037 [11/10 19:17:33.535]
Read request for file <T46S.rom>. Mode octet [11/10 19:17:33.536]
File <T46S.rom> : error 2 in system call CreateFile The system cannot find the file specified. [11/10 19:17:33.537]
Connection received from 192.168.1.100 on port 1037 [11/10 19:18:36.615]
Read request for file <T46S.rom>. Mode octet [11/10 19:18:36.616]
OACK: <timeout=5,blksize=1468,> [11/10 19:18:36.616]
Using local port 53804 [11/10 19:18:36.616]
Peer returns ERROR <File too large> -> aborting transfer [11/10 19:18:36.619]
Connection received from 192.168.1.100 on port 1041 [11/10 19:18:36.701]
Read request for file <T46S.bin>. Mode octet [11/10 19:18:36.701]
OACK: <timeout=5,blksize=1468,> [11/10 19:18:36.701]
Using local port 53805 [11/10 19:18:36.701]
<T46S.bin>: sent 1486 blks, 2181144 bytes in 2 s. 0 blk resent [11/10 19:18:38.743]
Connection received from 192.168.1.100 on port 3108 [11/10 19:18:38.768]
Read request for file <T46S.rfs>. Mode octet [11/10 19:18:38.768]
OACK: <timeout=5,blksize=1468,> [11/10 19:18:38.769]
Using local port 49399 [11/10 19:18:38.769]
<T46S.rfs>: sent 5715 blks, 8388608 bytes in 8 s. 0 blk resent [11/10 19:18:46.623]
Connection received from 192.168.1.100 on port 41386 [11/10 19:18:53.132]
Read request for file <T46S.rom>. Mode octet [11/10 19:18:53.133]
Using local port 64144 [11/10 19:18:53.133]
Ack block 20256 ignored (received twice) [11/10 19:19:01.166]
<T46S.rom>: sent 52124 blks, 26687344 bytes in 20 s. 0 blk resent [11/10 19:19:13.673]


RE: Recovery Mode - Jacky_Yealink - 12-02-2019 11:14 AM

(10-11-2019 06:33 PM)Challenger VoIP Wrote:  I am trying to recover some T46S phones using TFTP, i have the 3 files required, but every time i am getting an error message stating the ROM file is too BIG. does any one have any ideals please. This is what i am getting

Connection received from 192.168.1.100 on port 1037 [11/10 19:17:33.535]
Read request for file <T46S.rom>. Mode octet [11/10 19:17:33.536]
File <T46S.rom> : error 2 in system call CreateFile The system cannot find the file specified. [11/10 19:17:33.537]
Connection received from 192.168.1.100 on port 1037 [11/10 19:18:36.615]
Read request for file <T46S.rom>. Mode octet [11/10 19:18:36.616]
OACK: <timeout=5,blksize=1468,> [11/10 19:18:36.616]
Using local port 53804 [11/10 19:18:36.616]
Peer returns ERROR <File too large> -> aborting transfer [11/10 19:18:36.619]
Connection received from 192.168.1.100 on port 1041 [11/10 19:18:36.701]
Read request for file <T46S.bin>. Mode octet [11/10 19:18:36.701]
OACK: <timeout=5,blksize=1468,> [11/10 19:18:36.701]
Using local port 53805 [11/10 19:18:36.701]
<T46S.bin>: sent 1486 blks, 2181144 bytes in 2 s. 0 blk resent [11/10 19:18:38.743]
Connection received from 192.168.1.100 on port 3108 [11/10 19:18:38.768]
Read request for file <T46S.rfs>. Mode octet [11/10 19:18:38.768]
OACK: <timeout=5,blksize=1468,> [11/10 19:18:38.769]
Using local port 49399 [11/10 19:18:38.769]
<T46S.rfs>: sent 5715 blks, 8388608 bytes in 8 s. 0 blk resent [11/10 19:18:46.623]
Connection received from 192.168.1.100 on port 41386 [11/10 19:18:53.132]
Read request for file <T46S.rom>. Mode octet [11/10 19:18:53.133]
Using local port 64144 [11/10 19:18:53.133]
Ack block 20256 ignored (received twice) [11/10 19:19:01.166]
<T46S.rom>: sent 52124 blks, 26687344 bytes in 20 s. 0 blk resent [11/10 19:19:13.673]

Dear Customer,

Greeting from Jacky.

Please try to use another rom file to see if it's OK.
If still cannot, please try another TFTP server.
If still cannot, please try to use 3CDaemon soft to see if it's OK.

Please have a try and share me the result, thanks in advance!

Best Regards
Jacky