+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Yealink Device Management Platform (/forumdisplay.php?fid=61)
+--- Thread: DHCP Location based dm.cfg possible? (/showthread.php?tid=43184)
DHCP Location based dm.cfg possible? - Robert.Distl - 09-12-2019 02:36 PM
Hi everyone,
we are currently evaluating Yealink Devices to be used in our Skype for Business / Teams environment.
During that evaluation we also got in touch with YDMP as a management Platform.
As we got like 100+ locations worldwide which probably need to get managed we thought it would be a good idea to automatically assign the devices to their according location.
In my mind an easy attempt would be a different, location based dm.cfg filepath supplied by the location's DHCP server which includes the assignmentpath in YDMP's Site management.
Is there a chance this is going to work with the current version of YDMP? How would the entry in the dm.cfg look like?
The "Yealink_Device_Management_Platform_Administrator_Guide_V2.0.0.15.pdf" doesn't give a hint about this.
our YDMP's currently used version is 3.3.0.3
Appreciate your input
Robert
edit: I wasn't able to post the dm.cfg's content, as this was discovered as spam, therefore I attached it for your reference (although it is all standard I'd say)
RE: DHCP Location based dm.cfg possible? - thomas.hauff - 11-06-2019 09:59 AM
(09-12-2019 02:36 PM)Robert.Distl Wrote: Hi everyone,
we are currently evaluating Yealink Devices to be used in our Skype for Business / Teams environment.
During that evaluation we also got in touch with YDMP as a management Platform.
As we got like 100+ locations worldwide which probably need to get managed we thought it would be a good idea to automatically assign the devices to their according location.
In my mind an easy attempt would be a different, location based dm.cfg filepath supplied by the location's DHCP server which includes the assignmentpath in YDMP's Site management.
Is there a chance this is going to work with the current version of YDMP? How would the entry in the dm.cfg look like?
The "Yealink_Device_Management_Platform_Administrator_Guide_V2.0.0.15.pdf" doesn't give a hint about this.
our YDMP's currently used version is 3.3.0.3
Appreciate your input
Robert
edit: I wasn't able to post the dm.cfg's content, as this was discovered as spam, therefore I attached it for your reference (although it is all standard I'd say)
Hi Robert,
did you get any feedback on this? We`re looking for the same functionality as we`re deploying approx. 150 devices from different locations and don`t want to assign the devices everytime to the correct locations manually inside YDMP.
Thanks and regards
Thomas
RE: DHCP Location based dm.cfg possible? - Eira Jeremie - 03-08-2024 05:56 PM
(09-12-2019 02:36 PM)Robert.Distl Wrote: Hi everyone,
we are currently evaluating Yealink Devices to be used in our Skype for Business / Teams environment.
During that evaluation we also got in touch with YDMP as a management Platform.
As we got like 100+ locations worldwide which probably need to get managed we thought it would be a good idea to automatically assign the devices to their according my location now.
In my mind an easy attempt would be a different, location based dm.cfg filepath supplied by the location's DHCP server which includes the assignmentpath in YDMP's Site management.
Is there a chance this is going to work with the current version of YDMP? How would the entry in the dm.cfg look like?
The "Yealink_Device_Management_Platform_Administrator_Guide_V2.0.0.15.pdf" doesn't give a hint about this.
our YDMP's currently used version is 3.3.0.3
Appreciate your input
Robert
edit: I wasn't able to post the dm.cfg's content, as this was discovered as spam, therefore I attached it for your reference (although it is all standard I'd say)
That's a valid approach. However, the specific entry in the dm.cfg file for this purpose may not be captured in the current version of "Yealink_Device_Management_Platform_Administrator_Guide_V2.0.0.15.pdf".