SNMP edit contents : hostname, location, contact ? - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: Phone specific topic (/forumdisplay.php?fid=12) +---- Forum: T2xP Series (/forumdisplay.php?fid=21) +---- Thread: SNMP edit contents : hostname, location, contact ? (/showthread.php?tid=43119) |
SNMP edit contents : hostname, location, contact ? - lynch4_fr - 08-26-2019 08:55 AM Hi, I use your Firmware (9.70.0.103) on my T20P because SNMP is enable. And it is easy to make an inventory. All phones have the same hostname. Is it possible to edit some contents ? Please. Or This release note annonce that the firmware 9.70.0.120 added some fields to the snmp section : YealinkSIPPhoneReleaseNoteofVersion70-19394038218.pdf Is it possible to have a dowload link for this firmware 9.70.0.120 or 9.70.0.100 ? Please. Thanks --- <CONTENT> <CONTACT>Sysadmin (root@localhost)</CONTACT> <DESCRIPTION>Linux IPPHONE 2.6.10n #8 Fri Jan 13 18:23:27 CST 2012 mips</DESCRIPTION> <LOCATION>Server Room</LOCATION> <MANUFACTURER>Yealink</MANUFACTURER> <MODEL>T20P</MODEL> <SNMPHOSTNAME>IPPHONE</SNMPHOSTNAME> <TYPE>PHONE</TYPE> <UPTIME>17 hours, 58:53.33</UPTIME> </DEVICE> <MODULEVERSION>2.7</MODULEVERSION> <PROCESSNUMBER>1</PROCESSNUMBER> </CONTENT> RE: SNMP edit contents : hostname, location, contact ? - lynch4_fr - 08-27-2019 11:53 AM Hi, I find that MIB have a readwrite access, great !!! sysContact .1.3.6.1.2.1.1.4 sysName .1.3.6.1.2.1.1.5 sysLocation .1.3.6.1.2.1.1.6 So i try a snmpset like this : snmpset -v 2c -c private 10.169.19.83 .1.3.6.1.2.1.1.5 s dsiun@univxx.f But i have a timeout error because the community private is wrong Timeout: No Response from 10.169.19.83 snmpwalk -v2c -c private 10.169.19.83 Timeout: No Response from 10.169.19.83 snmpwalk public is ok snmpwalk -v2c -c public 10.169.19.83 What is the community to write contents MIB ???? Tanks for your help. |