+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: T46G 28.83.0.55 (/showthread.php?tid=43117)
T46G 28.83.0.55 - sfrazier - 08-25-2019 04:20 PM
Once the phone goes blanks the screen, every little bit it lights up and comes on and off at different times. Is there a way to keep the screen off once it goes to sleep until you use the phone or a call comes in? Its annoying to have the screen light up for no apparent reason periodically.
TIA.
(08-25-2019 04:20 PM)sfrazier Wrote: Once the phone goes blanks the screen, every little bit it lights up and comes on and off at different times. Is there a way to keep the screen off once it goes to sleep until you use the phone or a call comes in? Its annoying to have the screen light up for no apparent reason periodically.
TIA.
Sorry, I should have said which PBX I am using. FreePBX.
PBX Firmware:12.7.6-1904-1.sng7
PBX Service Pack:1.0.0.0
RE: T46G 28.83.0.55 - complex1 - 08-25-2019 05:01 PM
Hi,
This could be caused by the BLF subscribe activities.
Please check the FreePBX template to disable this feature or via auto provisioning.
Code:
features.blf_active_backlight.enable = 0Hope this will help.