+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: Auto Provisioning (/forumdisplay.php?fid=14)
+--- Thread: How to erase a parameter using autoprovision file (/showthread.php?tid=42889)
How to erase a parameter using autoprovision file - Santi - 06-21-2019 10:02 AM
Hello,
I've configured via autoprovision file a backup SIP server in some T23G phones.
Now, I need to erase this configuration. I tried to leave it blank in the autoprovision file but when phones download the autoprovision file the parameter is not modified.
How can I erase it using autoprovision files? I don't want to erase it accessing to each phone web.
Thanks in advance,
RE: How to erase a parameter using autoprovision file - complex1 - 06-21-2019 10:25 AM
(06-21-2019 10:02 AM)Santi Wrote: Hello,
I've configured via autoprovision file a backup SIP server in some T23G phones.
Now, I need to erase this configuration. I tried to leave it blank in the autoprovision file but when phones download the autoprovision file the parameter is not modified.
How can I erase it using autoprovision files? I don't want to erase it accessing to each phone web.
Thanks in advance,
Hi,
Please use the parameter with value %NULL% (capital letters)
e.g. static.sip.nat_stun.server = %NULL%
Make sure the phone is running the latest firmware.
Hope this will help.