Yealink Forums
Call log on after Att transfer VP-T49G - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: Call log on after Att transfer VP-T49G (/showthread.php?tid=42853)



Call log on after Att transfer VP-T49G - Roksvel - 06-07-2019 06:01 AM

Good day, my problem:
Telephone 12345 calling to ext 1000, pickup and att transfer to 2000.
rpid succes recive and i see number 12345.
But in call log i see 1000.
Telephone VP-t49g

i try command:
transfer.save_initia_calllog.enable=1
features.save_init_num_to_history.enable = 0

i trying another version firmware, but no....

Pls help.


RE: Call log on after Att transfer VP-T49G - complex1 - 06-07-2019 09:20 AM

(06-07-2019 06:01 AM)Roksvel Wrote:  Good day, my problem:
Telephone 12345 calling to ext 1000, pickup and att transfer to 2000.
rpid succes recive and i see number 12345.
But in call log i see 1000.
Telephone VP-t49g

i try command:
transfer.save_initia_calllog.enable=1
features.save_init_num_to_history.enable = 0

i trying another version firmware, but no....

Pls help.

Hi,

Please try next parameters and see if it helps?
Code:
account.1.refresh_remote_id.enable = 1
features.save_init_num_to_history.enable = 1



RE: Call log on after Att transfer VP-T49G - Roksvel - 06-07-2019 11:59 AM

i trying but no effect...my current version 51.25.0.15


RE: Call log on after Att transfer VP-T49G - complex1 - 06-07-2019 02:05 PM

(06-07-2019 11:59 AM)Roksvel Wrote:  i trying but no effect...my current version 51.25.0.15

Hi,

I think f/w 51.25.0.15 do not understand these parameters.
Try upgrade to f/w 51.80.0.100 and try again.
http://support.yealink.com/documentFront/forwardToDocumentDetailPage?documentId=95


RE: Call log on after Att transfer VP-T49G - Roksvel - 06-18-2019 09:35 AM

i upgrade to f/w 51.80.0.100 and this parametr:

features.save_init_num_to_history.enable = 1
transfer.save_initia_calllog.enable = 1
account.1.refresh_remote_id.enable = 1
account.1.cp_source = 0

no effect... pls help