T58A Register: Provisioning on Bintec-Elmeg be.IP - Printable Version +- Yealink Forums (http://forum.yealink.com/forum) +-- Forum: IP Phone Series (/forumdisplay.php?fid=4) +--- Forum: T5X Series (/forumdisplay.php?fid=58) +--- Thread: T58A Register: Provisioning on Bintec-Elmeg be.IP (/showthread.php?tid=42832) |
T58A Register: Provisioning on Bintec-Elmeg be.IP - DS25 - 05-30-2019 07:17 AM Hello, I just tried (but failed) to register a T58A (newest firmware) on a Bintec-Elmeg be.IP Plus system.
Thank you for any hints! Solved! Forgot to create the phone device, which must be associated with the user! RE: T58A Register: Provisioning on Bintec-Elmeg be.IP - hannesp - 06-10-2019 06:11 PM (05-30-2019 07:17 AM)DS25 Wrote: Hello,AS you found a solution - I am just at the start. Where to "create the phone device"? My web admin just Shows a smal web ui RE: T58A Register: Provisioning on Bintec-Elmeg be.IP - DS25 - 06-10-2019 06:51 PM Hello hannesp, what do you mean with "web admin ... small web ui"? Where are you stuck? In the UI of the Bintec, it's best to use the assistant functions at the top of the list. For phone ("Telefonie") there are subtopic with - phone numbers (e.g. create the "25"), - users (e.g. "Otto" with passwort 123) - and devices ("Endgeräte", e.g. a new "my-Yealink"). These have to be combined, so when you create a user, you have to append a number, and the device has to be linked with a number or user. RE: T58A Register: Provisioning on Bintec-Elmeg be.IP - hannesp - 06-13-2019 12:26 PM (06-10-2019 06:51 PM)DS25 Wrote: Hello hannesp,thanks got it seems that the "Teams" Firmware doenst have a 2nd line SIP option |