+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: General topics (/forumdisplay.php?fid=15)
+--- Thread: How to make Outgoing AIP URI calls? (/showthread.php?tid=42748)
How to make Outgoing AIP URI calls? - KNERD - 05-07-2019 06:20 PM
The documentation mentions about allowing outgoing & incoming SIP calls directly to the telephone.
Which states, "IP Call feature allow the SIP phone to make and receive calls by IP address (Without SIP account)"
http://support.yealink.com/faq/faqInfo?id=268
I am trying to make a DSS key with speed dial and URL without success.
I have tried 200@xxx.xx.xxx.xx and SIP/200@xxx.xx.xxx.xx
I am not seeing anything in the docs about the proper format.
Thank you
RE: How to make Outgoing AIP URI calls? - complex1 - 05-07-2019 08:10 PM
(05-07-2019 06:20 PM)KNERD Wrote: The documentation mentions about allowing outgoing & incoming SIP calls directly to the telephone.
Which states, "IP Call feature allow the SIP phone to make and receive calls by IP address (Without SIP account)"
http://support.yealink.com/faq/faqInfo?id=268
I am trying to make a DSS key with speed dial and URL without success.
I have tried 200@xxx.xx.xxx.xx and SIP/200@xxx.xx.xxx.xx
I am not seeing anything in the docs about the proper format.
Thank you
Hi,
Please read:
http://support.yealink.com/faq/faqInfo?id=223
Hope this will help.
RE: How to make Outgoing AIP URI calls? - KNERD - 05-07-2019 09:19 PM
Yes, that was very helpful.
Thank you kindly for your response.
It turns out I did not need to put those asterisk in there. The issue was the telephone was trying to use Line 1. the registered account. Instead I put it on a non registered line and it works great.
Thanks again.
RE: How to make Outgoing AIP URI calls? - complex1 - 05-08-2019 02:53 PM
Glad to see the issue has been resolved.