Yealink Forums
T58A DSS Transparency - Printable Version

+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T5X Series (/forumdisplay.php?fid=58)
+--- Thread: T58A DSS Transparency (/showthread.php?tid=42658)



T58A DSS Transparency - cableguy103 - 04-11-2019 09:04 PM

I am having trouble finding the setting to change the transparency of the DSS keys. I have the SIP-T58A phones.

I have a test phone model SIP-T48A and I am able to change the DSS transparency setting with config setting (phone_setting.idle_dsskey_and_title.transparency=50%)
This setting works correctly with the T48 phone but not the T58 phone.

I made sure the the T58 phone is getting the setting by downloading the config of the phone but it is not apply that setting or something.


RE: T58A DSS Transparency - Gus E - 04-13-2021 06:04 AM

(04-11-2019 09:04 PM)cableguy103 Wrote:  I am having trouble finding the setting to change the transparency of the DSS keys. I have the SIP-T58A phones.

I have a test phone model SIP-T48A and I am able to change the DSS transparency setting with config setting (phone_setting.idle_dsskey_and_title.transparency=50%)
This setting works correctly with the T48 phone but not the T58 phone.

I made sure the the T58 phone is getting the setting by downloading the config of the phone but it is not apply that setting or something.

From Web GUI's help:

"Description:
1.It configures the transparency of the DSS key labels and status bar on the idle screen for the IP phone.
(It is only applicable to T57W/T54W/T48U/T48S/T48G phones. It is also applicable when the DSS key list is unfolded on the T57W/T48U/T48S/T48G phones)
CFG Configuration:
phone_setting.idle_dsskey_and_title.transparency
Valid Value:
(0%, the DSS key labels and status bar are non-transparent;
20%, 40%, 60%, 80% or 100%)"

It means, your T58A phone is not in the applicable list and your selected value, 50%, is not a valid one.