+- Yealink Forums (http://forum.yealink.com/forum)
+-- Forum: IP Phone Series (/forumdisplay.php?fid=4)
+--- Forum: T4x Series (/forumdisplay.php?fid=31)
+--- Thread: impossible to set bw.feature_key_sync (/showthread.php?tid=42630)
impossible to set bw.feature_key_sync - beghdadi-m - 04-05-2019 09:33 AM
Hello
we tried to enable feature key synchronisation on T46S device firmware version V81.110 by provisioning.
we modified the section bellow:
#######################################################################################
## Broadsoft Setting ##
#######################################################################################
bw.enable = 1
###It enables or disables feature key synchronization.
###0-Disabled,1-Enabled.
###The default value is 0.
bw.feature_key_sync = 1
But the device didn't accept the modification.
bellow the log on the device
ATP [805]: ATP <6+info > skip item<bw.feature_key_sync
how can I set the feature key synchronisation by provisioning ?
thanks for your help